Helmets

We carry the best brands in the business including BMW, Shoei, HJC, Schuberth, ICON and Zox. Check out our great selection of helmets.

System 6 Helmet just arrived!

The time has finally come: the System 6 helmet has just been introduced. The helmet has seen numerous innovations over the years, being the consistent continuation of the highly successful BMW Motorrad folding helmet which dates back to 1981.

This light helmet is fitted with a double visor and – for the first time – an integrated sun shield, too. This can be conveniently adjusted to continuously variable levels using a slider at the left-hand edge of the helmet.

The design refers to some of the characteristic features of the predecessor models but applies a new interpretation. By means of an ingenious four-jointed mechanism, the folding chin section moves in an elliptical path and is thus closer to the helmet shell. This gives the helmet a very attractive look when it is open, too.

The outer shell in glass fibre reinforced plastic (GRP) is manufactured in two different sizes. The matching multi-section inner shell in expanded polystyrol (EPS) is foam padded in various thicknesses. This technology allows the best possible impact absorption to be achieved. Depending on size, the System 6 helmet weighs between 1,570 and 1,670 grams, making the new model 150 or 50 grams lighter than its predecessor in spite of the new components “double visor” and “integrated sun shield”.

The outer visor is three-dimensionally curved, has an antiscratch coating on both sides and absorbs UV radiation 100 per cent. The hydrophilic inner visor offers the best possible antifog protection in damp weather. In addition, the very effective and closable visor ventilation ensures clear visibility even in poor weather conditions.

On hot days, the large vent opening at the top of the helmet in combination with the low-pressure ventilation in the neck area ensures easily regulated but highly efficient cooling. In terms of aerodynamics and acoustics, too, the System 6 helmet is once again pioneering: it is aerodynamically neutral and even when the rider turns his head, only very slight torsional forces are generated. With a noise level of just 86 dB(A) at100 km/h, the System 6 helmet is one of the quietest folding helmets on the market.

For the chin strap a quick-release ratchet buckle which combines the advantages of the double-D fastener with those of a conventional quick-release buckle. The integrated neck straps ensure that the helmet remains in a position which guarantees the best possible protection in the event of an accident.

The entire inner lining in high-quality Alcantara and Coolmax fabric (DuPont) can be removed for washing along with the neck and cheek pads available in various sizes.

The System 6 helmet is of course suitable for the installation of the optional BMW Motorrad communication system and fulfils all the associated statutory requirements.

The new System 6 helmet is available in the sizes 48/49 to 64/65 and in three colours (Night Black non-metallic, Dark Grey matt metallic, White Silver metallic) and in two decor versions (Cosmic, SharpEdged).

BMW Enduro Helmet The new Enduro helmet (R3662 from your local BMW dealer) is built on a lightweight shell of combined fibreglass, carbon fibre and Kevlar for tensile strength and crush resistance. It has removable and washable head and cheek padding, and a double D-ring chinstrap with an integrated neckband to reduce the possibility of the helmet twisting in the event of an accident Two adjustable openings in the top of the helmet provide ventilation and the inner is lined with DuPont CoolMax material to ensure moisture wicking and "breathability".

BMW System 5 The fifth generation of the BMW System 5 is designed to be easily converted from a full-face helmet into off-road or open-face versions easily and without special tools. It's ECE-2205 approved with a glass-fibre, carbon and Kevlar outer shell. Chin and neck pads are available in various sizes to help find the perfect fit and a neck strap is included as a secondary fastening. Ventilation uses BMW's Airflow system, and the interior anti-bacterial and breathable Dupont padding is removable and washable. A wind tunnel was used to design a helmet that is stable and easier on the neck muscles and the noise levels inside the lid have been drastically reduced. At 100km/h, the noise inside the lid was measured at 86 decibels. The System 5 weighs 1690g, and comes with an anti-scratch and anti-mist visor.

HJC AC12 Carbon Fibre * Carbon Fiber Composite Weave Shell: Extremely lightweight. Superior fit and comfort using advanced CAD technology. * AccuSight™Anti-fog Faceshield: Optically superior 3D design provides 95% UV protection and an anti-scratch coating. * RapidFire™ Shield Replacement System: Quick, secure, tool-less removal and installation. * 2-stage Shield Closure Mechanism: Compresses shield into the eye port gasket providing an extremely secure seal. * 3rd-Generation “ACS” Advanced Channeling Ventilation System: Full front to back airflow flushes heat and humidity up and out. * AquaTrans® Moisture-wicking Interior: Comfortable, removable and washable. * SNELL/DOT Approved * SIZES: XS-XXL

HJC AC12 Matte The new AC-12 by HJC incorporates racer-tested features such as the Advanced Composite Material (ACM) shell and an Advanced Channeling Ventilation System (ACS) to provide one of the most technologically advanced helmets in its class. TECHNICAL INFORMATION Standards: Dot-218, Snell M-2005 Construction: (ACM) Fiberglass and Spectra â Weight: 1600 grams (approximate based on size medium solid color)

HJC AC-2 JC helmets introduces its ultimate half helmet, the AC-2. All types of riders, especially Touring and Cruisers, will appreciate the high-end features and stylish lines. Features * Lightweight, fiberglass and Spectra® shell construction * A Triple intake forehead vent is combined with a channeled styro liner and two rear venturi exhaust vents to allow for flow-through ventilation * Removable/washable, Nylex® inner liner and cheek pads * Removable (zip-off) neck curtain with Nylex® liner for added comfort * Nylon strap retention band neatly secures the chin strap * Built-in communication system speaker pockets Technical Information for the HJC AC-2 * Standards: DOT-218 * Construction: Fiberglass and Spectra® * Weight: 2.2 lbs/1000 grams (approx.)

HJC CL-31 * Lightweight, injection-molded, thermoplastic alloy shell * Two-piece channeled EPS liner for shock absorption and directed air flow * Plush, brushed-Nylex interior for a comfortable fit * 3-snap, black visor * Channeled forehead vents combine with Venturi exhaust vents for adjustable airflow through ventilation * Nylon strap-retention band neatly secures chinstrap * DOT-218 certified

HJC CL-MAX Element SHELL DESIGN: Wind tunnel tested aerodynamic, lightweight shell. Injection molded polycarbonate shell construction. Channeled expanded poly-styrene liner. One-handed operation for easy opening and closing of chin bar/face shield. *VENTILATION: Venting system provides precise air control allowing for multiple opening positions. Adjustable top vents and chin vent directs airflow to the left and right rear top exhaust vents. Minimal noise level design. Channeled lightweight EPS liner and cheek pads allows for maximum internal airflow and improved comfort. Built-in neck roll exhaust vent. INTERIOR CONSTRUCTION: Comfortable removable Nylex liner and cheek pads. Optional cheek pad sizes to achieve a “custom fit”. Wrap around neck roll reduces wind noise. Double “D” ring chin strap retention system easily secures excess chin strap length. SHIELD MECHANISM Aerodynamic flush mounted quick release shield. Quick and hassle free shield mounting device. No screws or tools required for installation or removal. Cam action spring loaded ratchet system pulls shield inward when closing ensuring a perfect seal every time. Shield closure will adjust up to 6mm upon increased speeds. Adjustable ultra violet hard coated shield. Seven position positive lock ratchet. Eyeglass friendly optically correct one-piece design with 95% protection from U.V. rays.

Icon Domain Solid Rubatone * Carbon Fiber/Dyneema/Aramid composite shell for strength * DOT and SNELL M2005 approved (North America) * ECE 22-05 approved (Europe) * Dorsal vent for additional ram-air induction * Large rear exhaust ports route hot air out of helmet * Removable molded breath deflector reduces shield fogging * Removable chin curtain seals out unwanted turbulence * Unique bottom mounted chin air intake system * Quick change fog-free eye shield * Rubatone Finished. Rubatone paint is a special formula of rubberized polymers and vivid color. A helmet finish like no other...this rubberized "grippy" surface was developed for the sole purpose of matching your riding gear. Its flat appearance and distinct feel give you the street style that you've been looking for.

Icon Mainframe Halo Gloss finished Super-vent venturi cooling system Secondary ram-air forehead vent Internal on/off chin exhaust switch offers control of escaping air Side exhaust port works in conjunction with internal chin exhaust to release old air Removable molded breath deflector reduces shield fogging Positive-lock chin venting system helps prevent fogging Removable cheek pads with formed ear pockets that can accept communication or audio speakers Optically correct Polycarbonate, 7-position shield offers safe, clear vision and easy no-tool replacement system

Icon Mainframe Hooligan * Dyneema/Fiberglass composite shell for strength * DOT and Snell M2005 approved (North America) ECE 22-05 approved (Europe) * Super-vent venturi cooling system * Secondary ram-air forehead vent * Fully removable/washable cheekpads * Internal on/off cheek exhaust switch * Removable molded breath deflector reduces shield fogging * Positive-lock chin venting system helps prevent fogging * Optically correct polycarbonate, 7-position shield offers safe, clear vision and easy no-tool replacement system

Schuberth C2 Helmet The quietest Flip Up motorcycle helmet in the world with Integrated Sun Visor German technology probably makes this the best flip front motorcycle helmet in the world. The Schuberth C2 Concept motorcycle hemlet is light, solid and perfectly manufactured.

Schuberth S1 The most advanced integral helmet in the world uses Formula One technology and wind-tunnel testing derived from the Ferrair and BMW Power F1 helmet programs. S.T.R.O.N.G. fiber shell construction and modular EPS inner shock liner utilizes a proprietary carbon fiber/aramid shell and segmented inner liner to maximize protection. High-speed aeroacoustic wind tunnel testing in Germany provides superior aerodynamics and a super-low noise rating of 85 dBA at 62 mph. Only integrated helmet available with a retractable sun visor (anti-fog, anti-scratch and quick-change). # Optically perfect quick-release clear face shield is hard-coated and anti-fog treated. # Only helmet designed and crafted in Germany, home of Porsche, Mercedes and Zeiss. # Exclusive internal fitting system utilizes adjustable crown pads and sweatbands to deliver a superb fit for many different head shapes. # Superior venting system delivers maximum cooling without increased noise levels. # Exclusive AROS Anti-Roll-Off System is integrated into the convenient quick-release chin strap system.

Shoei RF 1000 Aerodynamic Shell Design * Aerodynamic properties are maximized through extensive wind tunnel and rider testing * The Aero Stabilizer dramatically reduces drag and lift coefficients, thus diminishing rider fatigue and increasing performance Two-Layer EPS Liner System * Two-layer liner offers unmatched ventilation with internal channels and exhaust ports throughout the helmet * Integrated Upper Air Intake minimizes air turbulence and maximizes air stream in all riding positions * Outlet holes in the Aero Stabilizer allow warm air to be exhausted * The lower air intake provides an additional source of air flow * The neck outlet vent allows for effective air exhaust Lightweight, Advanced Integrated Matrix Plus (AIM+) * High performance fiber materials are combined with extremely elastic organic fibers to create a shell structure that is ultra lightweight, rigid and resilient Anti-Fog System * The lower air intake provides air flow that helps to diminish shield fogging 3D Interior Liner * Removable interior cheek pads available in optional sizes for a custom fit * Chin strap cover can easily be removed to allow for cleaning or replacement Standard Chin-Strap Clip * Neatly secures chin strap Shoei Helmets CX-1 V Shield and Lock System * Q.R.B.P. (Quick-Release Base Plate) allows tool-less shield removal * A wide, 3-dimensionally curved shield offers increased peripheral vision and optical clarity * Scratch-resistant coating * 100% protection from harmful UV A & B rays * A pre-set lever can easily lock the shield in place to prevent it from opening unexpectedly Technical Information for the Shoei RF 1000 * Standards: DOT 218, Snell-M2000 * Construction: AIM+ (Advanced Integrated Matrix Plus) materials * Weight: 3.24 lbs / 1470 grams (approx.)

Shoei TZR Shoei created the TZ-R to perform for first time riders as well as seasond veterans of the road. The TZ-R is the most affordable model in the Shoei lineup, without compromising performance and safety. The TZ-R features an Aerodynamic shell design that is lightweight, Advanced Integrated Matrix Plus (AIM+), weighs 3.3lbs/1500 grams. The TZ-R also featurs a Two-layer EPS Liner system with cheek pads are removable, and washable. With 3 graphic designs and 9 solid color helmets sizes from XXS-XXL *xxs comes in black or white only*

Zox Alto - Revolutionary thin EPS liner system for narrower profile shell. - Fiberglass shell construction. - Adjustable front vents. - 3-snap shorty visor included. - Ear Protector included.

Zox Kaba Thermoplastic alloy construction, meets or exceeds DOT standards. - Quick release clear shield included with helmet. - Smoke and mirror shields available. - Removable, washable, 3-piece liner system in 6 sizes - Adjustable top vent, flow through rear vent

Zox Tavani R Complete highly effective ventillation system. - Utilizing Advance Polycarbonate Thermo Alloy Resin Technology. - 3D fully removable, washable and replaceable interior. - The latest advanced optically corrected polycarbonate shield with anti-scratch UV resistant.